Fluke I30

Best deal Fluke I30 AC/DC Current Clamp. Electrical specifications Specified current range 30 mA to 30A dc, 30 mA to 20 A ac rms Usable current range 5 mA to 30 A dc, 30 mA to 20 A ac rms Crest Factor 1.4 inches Output sensitivity 100 mV/A Accuracy (at +25 °C) ± 1 percent of reading ± 2 mA Resolution ± 1 mA Load impedance > 10 k Ohms and ? 100pF Conductor position sensitivity ± 1 percent relative to center reading Frequency range DC to 20 kHz (- 0.5 dB) Temperature coefficient ± 0.01 percent of reading/degrees Centigrade Power supply 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator Working voltage (see Safety Standards section) 300 V ac rms or dc General Specifications Maximum conductor size 19 millimeter diameter Output connection Fluke I30 4 millimeter safety connector Output zero Manual adjust via thumbwheel Cable length 1.5 meters operating temperature range 0 to +50 degrees Centigrade Storage temperature range (with battery removed) -20 to +85 degrees Centigrade Operating humidity 15 to 85 percent (non-condensing) Weight 250 g Safety standards BS EN 61010-1:2001 BS EN 61010-2-032:2002 BS EN 61010-031:2002 300 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 300 V ac ms or dc and frequencies below 1 kHz EMC Standards EN 61326: 1998 +A1, A2, & A3 Output sensitivity 100 mV/A Specified current range 30 mA to 30A dc, 30 mA to 20 A ac rms Usable current range 5 mA to 30 A dc, 30 mA to 20 A ac rms Fluke I30 I 30 AC DC Current Clamp Meter The i30 current clamp is based on Hall Effect technology to use in measurement of both DC and AC current DC range: 30 mA to 30 A AC range: 30 mA to 20 A rms ... Learn more »

Fluke I30 Review: Fluke I30 AC/DC Current Clamp. Read more »

I30 Fluke Price: Check price »